MPS® ladder platform
Ladder platform MPS was made to enable using the ladder in difficult terrain without putting ladder on any construction and at the same time let the worker safety work with fall protection system as well.
MPS ladder platform consists of:
- two or three elements extensional ladder made of fiberglass and with aluminum steps,
- two independent telescopic supports (not connected with
the ladder) - fall protection system (rope clamps, anchorage step, fall
protection device, ropes) - due to pulley system it is very easy to extend and use the system
MPS ladder platform is used in situations like:
- there is no possibility to get to the workplace with aerial
platform - with electrical connections when it is forbidden to put ladder on the wall
- with electrical devices when it is too sensitive to put ladder on it
- with damaged poles when it isn’t strong enough to use
ladder on it
MODELS: | WORKING HEIGHT |
2×3,0m – DM 00230 | 5,5m |
2×3,5m – DM 00235 | 6,5m |
2×4,0m – DM 00240 | 7m |
2×5,0m – DM 00250 | 8,5m |
2×6,0m – DM 00260 | 10,5m |
3×3,0m – DM 00330 | 7,5m |
3×3,5m – DM 00335 | 8,5m |