MPS PLATFORM was made to enable using the ladder in
difficult terrain without putting ladder on any construction and at the same time let the worker safety work with fallprotection system as well.
Furthermore MPS PLATFORM can be used also to enable
the worker to protect against fall down in workplace on ladder and outside when possibilities to create appropriate anchorage point are limited.
Can be used supported by construction of the building or electrical devices (like TRANSOR) to protect against falldown by anchorage step on workplace as well.



MPS PLATOFRM consists of:

  • two or three elements extensional ladder made of fiberglass and with aluminum steps,
  • two telescopic supports connected with the ladder
  • two independent telescopic supports (not connected with the ladder)
  • fall protection system (rope clamps, anchorage step,
    retractable fall protection device, ropes)
  • due to pulley system it is very easy to extend and use the system


MPS PLATFORM is used in situations when (there is no
possibility to get to the workplace with aerial platform, with electrical connections when it is forbidden to put ladder on the wall, with electrical devices when it is too sensitive to put ladder on it, with damaged poles when it isn’t strong enough to use ladder on it, etc.


Models Working Height:
2×3,5m DM20235 6m
2x4m DM20240 7m
3×3,5m DM20335 8,5m
3x4m DM20340 10m
Obrazek posiada pusty atrybut alt; plik o nazwie MPS-fasada-it2.jpg
Obrazek posiada pusty atrybut alt; plik o nazwie MPS-PL-i-jasna-linia-IT.jpg
Obrazek posiada pusty atrybut alt; plik o nazwie MPS-PLATFORM-IT-2.jpg